Determinations of Compression Buckling for Long and Intermediate Aluminum Alloy 2014-T4 Columns
Keywords:
2014-T4 aluminum alloy, Shot Penning (SP), Ultrasonic Impact Treatment (UIT), Critical buckling load (Pcr)Abstract
Experimental tests were carried out on long and intermediate columns of 2014-T4 aluminum alloy stressed to compression buckling. 24 samples were used, divided into two groups (12 specimens before shot peening and ultrasonic impact peening (SP +UIP) and the rest after (SP +UIP)). The ultimate tensile strength (UTS) and yield strength (YS) were improved due (SP +UIP) by 2.60% and 3.030%, respectively. ANSYS 18.2 (APDL) with the theories of Euler and Johnson was theories was used to estimate the critical buckling load (Pcr) and compare the results with the experimental work. It was found that there was strong agreement between the theories of Euler and Johnson and theories and the experimental work, with safety factors of (1.6, 2.3) and (1.7, 2.5) for long and medium columns before and after the experiment, respectively (SP +UIP). In contrast, ANSYS 18.2 (APDL) provided good predictions with a safety factor of (2.1 and 2.6) and (1.8 and 2.6) for long and medium columns before and after (SP +UIP), respectively.
Downloads
References
Anthony Beeman, "Column Buckling Analysis", M.Sc. thesis, mechanical engineering, Rensselaer Polytechnic Institute Groton, 2014.
Allan L. F., Kasper S. L., "Methods for Decreasing the Total Solution Time of Linear
Buckling Finite Element Analyses", M.Sc. Thesis, Aalborg University, Department of Mechanical and Manufacturing Engineering, 2012.
Hussein F. Ajaj,"Buckling-Corrosion Interaction of Al Alloy (6061-T4) Columns under Increasing Loads and Detection using Wireless Control System", M.Sc. Thesis, University of Technology, Electromechanical Engineering Department, 2018.
R. S. Khurmi and N. Khurmi, Strength of materials (Mechanics of Solids), Revised edition, S. Chand & Company LTD., New Delhi, 2005.
Amir Javiddinejad, Zodiac Aerospace, “Buckling of Beams and Columns under Combined Axial and Horizontal Loading with Various Axial Loading Application Locationsˮ, Journal Of Theoretical and Applied Mechanics, Sofia, Vol.42, No.4, pp. 19 – 30, 2012. DOI: https://doi.org/10.2478/v10254-012-0017-9
H. J. Alkawi, A. H. Majeed, S. Fahad. "Estimation of fatigue-corrosion damage and life under variable loading based on modified corrosion fatigue model (MCFM)" J. Eng. & Dev., Vol. 16, No.4. 2012.
AL-Khazraji A. N., Al-Alkawi H. J. M, and Essam Z. Fadhel,” Determination the Optimum Shot Peening Time for Improving the Buckling Behavior of Medium Carbon Steel”, Eng. & Tech. Journal, Vol.32, No.3, 2014.
Salam N. Naji1, Hussain J. Al-Alkawi, Saad T. Faris “Combine Shot Penning (SP) and Ultrasonic Impact Treatment (UIT) for Soil Corrosion Buckling Strength Enhancement of AA 2014-T4"Al-Nahrain Journal for Engineering Sciences NJES 23 (2) 144 -152 ,2020. DOI: https://doi.org/10.29194/NJES.23020144
Saad T. Faris et al. "Cumulative Fatigue damage of AA7075 – T6 under Shot Peening and Ultrasonic Surface Treatments". Diyala Journal of Engineering Sciences Vol (14) No 1, 2021: 1-10.1.2021, DOI: https://doi.org/10.24237/djes.2021.14101
H. J. Alalkawi, and A. E. Elkhawad, "Analysis of ultrasonic peening mechanical properties and fatigue damage of 2017A-T3 aluminium alloy", international journal of energy and environment, 2016.
Ali A. Ali, Esam A. Ebrahim, Mohammed H. Sir, and Barazan A. Hamah Said, Effect of shot peening time on mechanical properties of aluminum alloys AA2017-T4 and AA6063- T5. Diyala journal of engineering sciences, 6(2), 1-8. 2013. DOI: https://doi.org/10.24237/djes.2013.06201
Yusuf Efe, Ibrahim Karademir, FazilHusem, Erfan Maleki, Ruslan Karimbaev, Auezhan Amanov, and Okan Unal, Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification. Applied Surface Science, Vol. 528. 2020. DOI: https://doi.org/10.1016/j.apsusc.2020.146922
American Society for Metals (ASM Handbook) Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. (10th ed.). Vol. 2. 1992.
American Society for Testing and Materials, ASTM B557M-14, July, 2014.
Therib Jameel Hussein, An investigation of elastic buckling for perforated plates in Aircraft structures. Msc Thesis, University of Technology, Iraq, 2004.
Kifah Hameed Al-Jubori, Columns lateral buckling under combined dynamic loading. Ph D Thesis, University of Technology, Iraq, 2005.
Hangzhou Create Ultrasonic Technology Co., Ltd., Ultrasonic pre stressing force impact treatment system (Operation instruction), 2021.
Robert L. Mott and Joseph A. Untener, Applied Strength of Materials, 6th ED, Taylor & Francis Group, LLC, 2017.
E. J. Hearn, Mechanics of materials, 3th ED, University of Warwick, United Kingdom, 2001.
Published
How to Cite
Issue
Section
Copyright (c) 2022 Saad T. Faris, Amjad M. Bader
This work is licensed under a Creative Commons Attribution 4.0 International License.
