Enhancing Wind Turbine Stability and Performance: A Case Study on Speed Control and Maximum Power Point Tracking

https://doi.org/10.24237/djes.2024.17101

Authors

  • Muhammad Qasim Nawaz Department of Electrical Engineering and Automation, Yangzhou University, 225127 Yangzhou, China
  • Wei Jiang Department of Electrical Engineering and Automation, Yangzhou University, 225127 Yangzhou, China
  • Aimal Khan Department of Electrical Engineering and Automation, Yangzhou University, 225127 Yangzhou, China

Keywords:

Wind turbine stability, Wind turbine performance, Speed control, Maximum power point tracking, Near-zero implementation

Abstract

Wind turbine performance is a critical aspect of renewable energy systems, and this study focuses on optimizing it through innovative strategies. It also discussed the different parts of WECS, such as wind turbines, generators, and control systems, to enhance their performance and efficiency. The research delves into the integration of speed control and Maximum Power Point Tracking (MPPT) mechanisms using a sophisticated Three-Phase Interleaved Buck-Boost Converter. The converter's unique topology, involving a back-to-back connection, shows a pivotal part in shaping the performance of the wind turbine. Furthermore, the near-zero implementation in MPPT strives to minimize oscillations and enhance photovoltaic panel and wind turbine efficiency. This technique, as explored in various studies, aims to achieve stable, efficient power output by reducing perturbations, ensuring optimal energy capture, and improving overall system reliability. This study investigates the transformation before and after near-zero implementation in various contexts. It explores the impact on energy efficiency with near-zero properties, and the performance of buildings, providing insights into the substantial changes brought about by near-zero initiatives. Additionally, the implementation of MPPT is explored, demonstrating that adjusting delta values can lead to faster stabilization times. By changing the negative delta value to -0.0005, the system achieves stabilization at the target power of 19 kW within 0.2 seconds. These findings emphasize the versatility of the Three-Phase Interleaved Buck-Boost Converter in enhancing both speed control and MPPT for wind turbines

Downloads

Download data is not yet available.

References

New installed wind energy capacity worldwide 2022 |Statista." New installed wind energy capacity worldwide 2022 | Statista. October 2023.

Global installed wind energy capacity 2022 | Statista. (2023c,). Global cumulative wind energy installed capacity. August 29

Alex. (2023b, October 9). Global Offshore Wind Report. Global Wind Energy Council. https://gwec.net/gwecs-global-offshore-wind-report-2023

Lawan, Muhammad, Ahmed Aboushady, and Khaled H. Ahmed. "Photovoltaic MPPT Techniques Comparative Review." 2020 9th International Conference on Renewable Energy Research and Application (ICRERA). 2020. 344-351

Y. Vidal, L. Acho, N. Luo, M. Zapateiro and F. Pozo, "Power Control Design for Variable-Speed Wind Turbines," Energies, vol. 5, p. 3033–3050, 2012.

Badawi, A. Samir "Paper review: maximum power point tracking for wind energy conversion system." 2020 2nd International Conference on Electrical, Control and Instrumentation Engineering (ICECIE). 2020. 1-6.

Mousa, Hossam H. H.,. "State of the art perturb and observe MPPT algorithms based wind energy conversion systems: A technology review." International Journal of Electrical Power & Energy Systems 126 (March 2021): 1-8

Abdullah, Mokhtar, A. H. M.. "A review of maximum power point tracking algorithms for wind energy systems." Renewable & Sustainable Energy Reviews 16 (June 2012): 3220–3227

A. Musyafa, I. Abadi, R. Noriyati, "Design and Implementation Wind Turbine Power Control System Base Particle Swam Optimization at Low Rate Wind Farm," International Journal of Mechanical & Mechatronics Engineering, vol. 19, p. 149–157, October 2019

Xu, Changzhi, et al. "Time-frequency analysis-based deep interference classification for frequency hopping system." EURASIP Journal on Advances in Signal Processing September 2022.

Gangavarapu, Sivanagaraju, and Akshay Kumar Rathore. "Analysis and Design of Three-Phase Interleaved Buck-Boost Derived PFC Converter." 2019 IEEE Industry Applications Society Annual Meeting. 2019. 1-8.

O. Apata and D. T. O. Oyedokun, "An overview of control techniques for wind turbine systems," Scientific African, vol. 10, p. e00566, 2020.

Kaouane, Mohamed, A. Boukhelifa. "Regulated output voltage double switch Buck-Boost converter for photovoltaic energy application." International Journal of Hydrogen Energy 41 (December 2016): 20847–20857.

Huangfu, Yigeng, Ronghua Ma, Bo Liang, and Yuren Li. "High power efficiency BucK Converter design for standalone wind generation system." International Journal of Antennas and Propagation 2015 (January 2015): 1–9.

H.Taufik, M.Efendi,. "Maximum Power Point Tracking Interleaved Boost Converter Using Cuckoo Search Algorithm on The Nano Grid System." JAREE (Journal on Advanced Research in Electrical Engineering) 5 (April 2021)

Raghavendra, Kummara Venkata Guru, et al. "A Comprehensive Review of DC–DC Converter Topologies and Modulation Strategies with Recent Advances in Solar Photovoltaic Systems." Electronics 9 (December 2019): 31

Pande, Ketan Kotecha, and Vijayakumar Varadarajan. "A review of maximum power point tracking Algorithms for wind energy conversion systems." Journal of Marine Science and Engineering 9 (October 2021): 1187.

Elkodama, Amira, Amr Ismaiel, A. Abdellatif, S. Shaaban, Shigeo Yoshida, and Mostafa A. Rushdi. "Control Methods for Horizontal Axis Wind Turbines (HAWT): State-of-the-Art Review." Energies 16 (September 2023): 6394.

Mousa, Hossam H. H. "State of the art perturb and observe MPPT algorithms based wind energy conversion systems: A technology review." International Journal of Electrical Power & Energy Systems 126 (March 2021): 106598.

Baba, Ali Omar, Guangyu Li, and Xiaohui Chen. "Classification and Evaluation Review of maximum power point tracking methods." Sustainable Futures 2 (January 2020): 100020.

Zhang, Xinyue, and Ershuai Li. "A Novel Method Based on Time-Frequency Modeling for Interference Analysis in Avionics Systems." 2022 IEEE 41st Digital Avionics Systems Conference (DASC). 2022. 1-8.

Kumar, Dipesh, and Kalyan Chatterjee. "A review of conventional and advanced MPPT algorithms for wind energy systems." Renewable & Sustainable Energy Reviews 2020: 957–970.

A. Musyafa, I. Abadi, R. Noriyati, M. Faiz and M. Asy'ari, "Design and Implementation Wind Turbine Power Control System Base Particle Swam Optimization at Low Rate Wind Farm," International Journal of Mechanical & Mechatronics Engineering, vol. 19, p. 149–157, October 2019

S. Roga, S. Das, S. Datta, V. Kisku and S. Bardhan, "Energy Converters for Wind Turbines: Implementation of Control Methods," in 2022 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2022

Beainy, N. Moubayed, and Fouad Kaddah. "Comparison of different types of generator for wind energy conversion system topologies." 2016 3rd International Conference on Renewable Energies for Developing Countries (REDEC). 2016. 1-6.

Gamal, Haytham, and A. Shaltout. Maximum output power of wind energy system combined with battery energy storage using rule-based control. 2021.

Muller, S., M. Deicke, and R. W. De Doncker. "Doubly fed induction generator systems for wind turbines." IEEE Industry Applications Magazine 8 (2002): 26-33.

Molina, Marcelo, and Pedro Mercado. "Modelling and Control Design of Pitch-Controlled Variable Speed Wind Turbines." 2011.

De Kooning, Jeroen D. M., , and Lieven Vandevelde. "Digital Twins for Wind Energy Conversion Systems: A literature review of potential modelling techniques focused on model fidelity and computational load." Processes 9 (December 2021): 2224

Hong, Ji-Su, Hoon-Ki Lee, Junghyo Nah, Kyong‐ "Semi-3D analysis of a permanent magnet synchronous generator considering bolting and overhang structure." Energies 15 (June 2022): 4374.

Bhutto, Darya Khan, and Faheem Akhtar Chachar. "WIND ENERGY CONVERSION SYSTEMS (WECS) GENERATORS: A REVIEW." 2019 2nd International Conference on Computing, Mathematics and Engineering Technologies (iCoMET). 2019. 1-6.

Alkul, Oguz, Dabeeruddin Syed, and Sevki Demirbas. "A Review of Wind Energy Conversion Systems." 2022 10th International Conference on Smart Grid (icSmartGrid). 2022. 72-77.

Ulutaş, Alper, and Tarik Duru. "Variable-Speed Direct-Drive Permanent Magnet Synchronous Generator wind turbine modeling and simulation." Kocaeli journal of science and engineering 2 (May 2019): 21–27.

Jaballah, Mohamed Akram, and Abdelkader Mami. "Design and Simulation of Robust Controllers for Power Electronic Converters used in New Energy Architecture for a (PVG)/ (WTG) Hybrid System." International Journal of Advanced Computer Science and Applications 8 (January 2017).

Louar Fateh, Djellad Abdelhak And Bouras Lakhdar, “Modeling and control of a permanent magnet synchronous generator dedicated to standalone wind energy conversion system”,Frontiers in Energy, Vol.10, No.2, , June 2016. 155-163

D. W. Hart, “Power Electronics’, McGraw Hill, 2011

Nandankar, Praful, and Jyoti Rothe. "Design and implementation of efficient three-phase interleaved DC-DC converter." 2016. 1632-1637.

A. Hammami, I. Saidi and D. Soudani, "Comparative Study of PMSG Controllers for Variable Wind Turbine Power Optimization," International Journal of Advanced Computer Science and Applications, vol. 9, January 2018.

A. Mseddi, S. L. Ballois, H. Aloui and L. Vido, "Robust control of a HESG for a wind energy application," Electric Power Systems Research, vol. 168, p. 250–260, March 2019.

P. Chen, D. Han and K. Li, "Robust adaptive control of maximum power point tracking for wind power system," IEEE Access, vol. 8, p. 214538–214550, January 2020.

E. C. Navarrete, M. T. Perea, J. C. J. Correa, R. V. C. Serrano and G. J. R. Moreno, "Expert Control Systems Implemented in a Pitch Control of Wind Turbine: A Review," IEEE Access, vol. 7, 2019, p. 13241–13259

B. Xie, Y. Ji, J. Wang, H. Wang, and C. Ma, ‘Modeling and control for a three-phase interleaved bidirectional DC-DC energy storage converter’, in 2017 China International Electrical and Energy Conference (CIEEC), 2017, pp. 153–158.

S. Musumeci, R. Bojoi, E. Armando, S. Borlo and F. Mandrile, "Three-Phases Interleaved Boost Power Factor Corrector for High-Power LED Lighting Application," Energies, vol. 13, 2020.

X. Li, J. Qian, D. Tian, Y. Zeng, F. Cao, L. Li and G. Zhang, "Maximum Power Tracking Control of Wind Turbines Based on a New Prescribed Performance Function," Energies, vol. 16, 2023.

M. Bereš, D. Kováč, T. Vince, I. Kováčová, J. Molnár, I. Tomčíková, J. Dziak, P. Jacko, B. Fecko and Š. Gans, "Efficiency Enhancement of Non-Isolated DC-DC Interleaved Buck Converter for Renewable Energy Sources," Energies, vol. 14, 2021.

J. Pande and P. Nasikkar, "A Maximum Power Point Tracking Technique for a Wind Power System Based on the Trapezoidal Rule," Energies, vol. 16, 2023.

S. Rajput, M. Averbukh, A. Yahalom and T. Minav, "An Approval of MPPT Based on PV Cell’s Simplified Equivalent Circuit During Fast-Shading Conditions," Electronics, vol. 8, 2019.

S. Jiao, D. Patterson and S. Camilleri, "Boost converter design for 20kW wind turbine generator," International Journal of Renewable Energy Engineering, vol. 2, January 2000.

S. Karyś and P. Stawczyk, "Cost-Effective Power Converters for Small Wind Turbines," Energies, vol. 14, 2021..

Y. Yang and S. C. Tan, "Trends and Development of Sliding Mode Control Applications for Renewable Energy Systems," Energies, vol. 12, 2019.

M. Lawan, A. Aboushady, and K. H. Ahmed, ‘Photovoltaic MPPT Techniques Comparative Review’, in 2020 9th International Conference on Renewable Energy Research and Application (ICRERA), 2020, pp. 344–351.

Published

2024-03-07

How to Cite

[1]
M. Q. Nawaz, Wei Jiang, and Aimal Khan, “Enhancing Wind Turbine Stability and Performance: A Case Study on Speed Control and Maximum Power Point Tracking ”, DJES, vol. 17, no. 1, pp. 1–18, Mar. 2024.