Numerical Analysis of Natural Frequency for U-Shaped Expansion Bellows in Fixed-Fixed and Fixed-Free Conditions

https://doi.org/10.24237/djes.2022.15311

Authors

  • Mustafa Sabri Mohammed Department of Mechanical Engineering, University of Diyala, 32001 Diyala, Iraq
  • Dhia A. Salal Department of Mechanical Engineering, University of Diyala, 32001 Diyala, Iraq

Keywords:

Bellows,, Frequency,, Convolution U-shape,, Boundary

Abstract

In this study, MATLAB code was used to analyze the natural frequency in two types of U-shape metal expansion bellows with various supporting conditions (fixed-fixed and fixed- free). The first bellow has a 10 mm inner diameter., and a length of (100, 200, 300) mm, has (36, 75, and 111) convolutions. While the second bellow, with an inner diameter of 20mm and (100,200,300) mm, has a number of convolutions (25,54 and 82). The result shows that by lowering the bellow length and increasing the bellow diameter, the natural frequency was raised. Were. Where, the maximum frequency was recorded at a maximum value of 20 mm in diameter and a length of 100 mm, about (13549.167 Hz) in the case of fixed-fixed and (13097.528 Hz) in the case of fixed-free. In general, the natural frequency depends directly on the stiffness and total mass of the pipe conveying fluid. The stiffness of the material is determined by the moment of inertia. As a result, increasing the diameter will increase the moment of inertia, which will result in an increase in stiffness, which will result in an increase in natural frequency.

Downloads

Download data is not yet available.

References

William P. Schonbergfl, Phillip A. Beasley, Gerald R. Guinn, Alan J. Bean , “Static Testing of U-Shaped Formed Metal Bellows”, Int. J. Pres. Ves. & Piping, pp. 207-226, 1990. DOI: https://doi.org/10.1016/0308-0161(90)90042-G

N. W. Snedden, “Analysis and Design Guidance for the Lateral Stiffness of Bellows Expansion Joints”, Thin-Walled Structures 3, pp.145-162, 1985.

N. W. Snedden, “Analysis and Design Guidance for the Lateral Stiffness of Bellows Expansion Joints”, Thin-Walled Structures 3, pp.145-162, 1985. DOI: https://doi.org/10.1016/0263-8231(85)90030-8

S.H. Gawande and N.D.Pagar, “A Combined Numerical and Experimental Investigation on the Effect of Dynamic Characteristics of Metal Expansion Bellows”, Hindawi Publishing Corporation International Journal of Metals, 2015.

S. I. Lee and J. Chung,” New non-linear modeling for vibration analysis of a straight pipe conveying fluid”, Journal of Sound and Vibration, 254(2), pp.313-325, 2002. DOI: https://doi.org/10.1006/jsvi.2001.4097

Karthikeyan Govindan, G. R. Jinu, R Kannaiah's,” Experimental Study and Analysis of Flow Induced Vibration in a pipeline”, International Journal of Engineering Research and Technology, 3(5), 2014.

Mao Qing, Zhang Jinghui, LuoYushan, Wang Haijun and Duan Quan, “Experimental studies of orifice induced wall pressure fluctuations and pipe vibrations”, International journal of pressure vessels and piping, 83, pp.505-511, 2006. DOI: https://doi.org/10.1016/j.ijpvp.2006.03.010

Avinash B Kokare, Prashant M Paward,”Vibration Characteristics of Pipe Conveying Fluid”, 4(51), pp.10951-10954, 2015.

Huang Yi-min, Liu Yong-shou, Li Bao-hui, Li Yan-jiang, Yue Zhu-feng,” Natural frequency analysis of fluid conveying pipeline with different boundary conditions”, Nuclear Engineering and Design, pp.461–467 , 2010 .

S. Naguleswaran, C.J.H. Williams,” Lateral vibration of a pipe conveying a fluid”, J. Mech. Eng. Sci. 10(3), pp .228–238, 1968. DOI: https://doi.org/10.1243/JMES_JOUR_1968_010_035_02

R. Becquet, I. Elishakoff, “Class of analytical closed-form polynomial solutions for clamped–Guided In homogeneous beams”. Chaos Solitons Fractals 12(9),pp. 1657–1678, 2001. DOI: https://doi.org/10.1016/S0960-0779(00)00125-9

Y.-S. Seo, W.-B. Jeong, W.-S. Yoo,” Frequency response analysis of cylindrical shells conveying fluid using finite element method”, J. Mech. Eng. Sci. 19(2),pp.625–633, 2005. DOI: https://doi.org/10.1007/BF02916184

S.S. Rao, “Vibration of Continuous Systems”, Wiley, New York, pp. 317–328, 2007.

K.R. Chellapilla, H.S. Simha, “Critical velocity of fluid conveying pipes resting on two parameter foundation”, J. Sound Vib. 302, pp.387–397, 2007. DOI: https://doi.org/10.1016/j.jsv.2006.11.007

Y.-M. Huang, Y.-S. Liu, B.-H. Li, Y.-J. Li, Z.-F. Yue,“Natural frequency analysis of fluid conveying pipeline with different boundary conditions”, Nucl. Eng. Des, 240,pp.461–467, 2010. DOI: https://doi.org/10.1016/j.nucengdes.2009.11.038

M.J. Jweeg, A.E. Yousif, M.R. Ismail,”Experimental estimation of critical buckling velocities for conservative pipes conveying fluid” J. Al-Khwarijmi Eng. 7(4),pp.17–26, 2011.

H. Yi-min, G. Seng, W. Wei, H. Jie, “A direct method of natural frequency analysis on pipeline conveying fluid with both ends supported”, J. Nucl. Eng. Des. 253,pp.12–22, 2012. DOI: https://doi.org/10.1016/j.nucengdes.2012.07.022

T. Li, “Effect of the elliptic degree of Ω-shaped bellows toroid on its stresses”, International Journal of Pressure Vessels and Piping, vol. 75, no. 13, pp. 951-954, 1998. DOI: https://doi.org/10.1016/S0308-0161(98)00039-8

Published

2022-09-01

How to Cite

[1]
M. Sabri Mohammed and D. . A. Salal, “Numerical Analysis of Natural Frequency for U-Shaped Expansion Bellows in Fixed-Fixed and Fixed-Free Conditions”, DJES, vol. 15, no. 3, pp. 106–116, Sep. 2022.